Sennheiser ASP-1 and ASP-2 Antenna Splitters

The ASP 2 passive RF antenna splitter has been designed for routing antenna signals to several receivers in a multi-channel system, i.e. up to four diversity receivers are supplied with the signals of only two antennas. The antenna splitter incorpora- tes DC distribution for powering up to four receivers in addi- tion to two antenna boosters via a single mains unit.

By lin- king two ASP 2 antenna splitters, an 8-channel system can be operated with only two antennas. By using the GA 2 rack adapter, two antenna splitters or one antenna splitter and one rack-mount receiver (e.g. EM 100 G2, EM 300 G2 or EM 500 G2) can be mounted into a 19″ rack.

ASP-1

The Sennheiser ASP 1 is an antenna splitter and power distribution system designed for the EM series rack mount receivers. The splitter supports up to four EM 100, EM 300 or EM 500 series receivers. Incoming RF signal is distributed to the connected receivers via the hardwired BNC output pigtail cables. The ASP 1 is capable of powering the connected receivers, sending DC power via the hardwired DC output cables. Remote powering eliminates excess cable and bulky power supplies.